Range: Oven won't heat
If the oven doesn't heat, the oven igniter might not be getting hot enough, the oven control thermostat might not be working or the bake or broiler element (in an electric oven) or bake or broiler burner (in a gas oven) might have failed. See our repair guides for step-by-step instructions for correcting these problems.
These repairs may help solve your Range problem:
Replace the range oven igniter
Most gas ovens have a glow-bar oven igniter and a safety gas valve. Those components are connected in a series-type electrical circuit. When the glow-bar oven igniter is hot enough to safely ignite the gas, the safety gas valve opens. Replace the oven igniter if doesn't glow, or if it glows but doesn't get hot enough to open the gas valve. Some ovens have a separate igniter for the bake burner and the broiler burner, which operate on the same principle.
Replace the range bake or broil element
In an electric oven, the bake element at the bottom of the oven and the broil element at the top of the oven provide the heat for baking and broiling. Replace them if they're broken or if the oven isn't heating properly.
Replace the range electronic oven control board
The electronic oven control (EOC) board governs the timing and execution of oven functions such as baking and broiling. It's usually in the control console and often has a digital clock on the front of its housing. Replace the electronic control board if it doesn't light up when it's supplied with electrical power, if it doesn't operate properly or doesn't properly send voltage to the bake or broil element (in an electric oven) or burner (in a gas oven).
Replace the range oven temperature sensor probe
The oven temperature sensor probe detects the actual temperature in the oven cavity. Replace it if it's not detecting the temperature properly, in which case the oven doesn't maintain the temperature you set. A complete failure, in which the sensor probe doesn't detect any temperature at all, usually triggers an error code on the electronic oven control board.
Reset or replace the range thermal fuse
Many range ovens have a bi-metal thermal fuse—also called a thermal limit switch—that protects the oven from overheating. The oven thermal fuse trips when the temperature in the oven gets too hot. After the thermal fuse trips, the oven won't heat. If the thermal fuse trips after the self-cleaning cycle, try resetting the fuse by turning off electricity to the range, removing the exterior back panel, and pushing the reset button. If the fuse tripped during normal operation, replace it. If the problem persists, the electronic oven control board might require replacement. Reset the thermal fuse after replacing the control board.
Replace the range's oven control thermostat
The oven thermostat is a temperature-controlled switch that controls heating inside the oven. Replace the thermostat if it doesn't maintain the oven temperature incorrectly, if it fails to turn on to the oven burner to heat the oven, or if it fails to turn off the burner when the oven is at the set temperature.
Replace the range's oven selector switch
The oven selector switch has electrical contacts that can fail. If the contacts in the oven selector switch fail, replace the switch.