Washer: Overfills

Few appliance mishaps are as dramatic as an overflowing washer. Step 1: Shut off the water at the supply valve on the wall behind the washer. Then look through this list of related repair to help you fix what went wrong.

These repairs may help solve your Washer problem:

Replace the washer water-level pressure switch

Water-level pressure switch

The water-level pressure switch detects the water level in the wash tub. If the water-level pressure switch is defective, the washer won't fill properly. It could not fill at all or it could overfill even to the point of overflowing. If the pressure switch doesn't accurately detect and control the water level in the washer, replace it.

For manuals, repair guides, and specific part recommendations, enter your model number.

Replace the washer water inlet valve assembly

Water inlet valve assembly

The water inlet valve assembly is a set of electrically operated water valves that control the fill function in the washer. Replace the water valve assembly if the washer won't fill because a valve doesn't open or if the washer overfills because the valve doesn't close.

For manuals, repair guides, and specific part recommendations, enter your model number.

Replace the washer main electronic control board

Main electronic control board

The main electronic control board, also called the mother board, governs the timing and execution of the washer component functions. It controls the fill valves, the drive motor and the drain pump.

For manuals, repair guides, and specific part recommendations, enter your model number.