My Kenmore he2 plus washer model #110.47532601 : shows 5 D and than F21 code #110.47532601
My Kenmore he2 plus washer model #110.47532601 is not function and shows 5 D and than F21 code. I replaced the Pump water part W10130913 still does the problem persists?
Posted July 20, 2013
Joseph P., July 20, 2013
Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!
dtova00, July 22, 2013
Thank you for your question. The 5d code is really SD code. The "SD" error code indicates a Suds Detection. SD is displayed when the machine/motor control analyzes drag on the basket detecting a suds-lock condition. This is generally caused by using the wrong type of detergent or just too much detergent.
The "F21" fault code will display if the drain time exceeds eight minutes. This fault code generally is caused by a restricted drain pump filter or using too much or the wrong kind of detergents.
The first thing to check and clean is the drain pump filter if the drain pump will run. If the drain pump is not running then it may have a jammed or faulty drain pump. I added an image below with instructions on how to access and remove the drain pump filter for cleaning. NOTE: Disconnect the power cord from the power source before removing the lower access panel. Also, remove all the water that you can before removing the drain pump filter or all the water will pour out on the floor. Have a shallow pan and towels handy even though you have removed all the water from the tub there will be water left below the basket.
In order to access the drain pump filter the lower access panel will need to be removed. (See images below.)
NOTE: There will be a lot of water left inside the pump so place a shallow pan under the filter before removing. I would also recommend having an old bath towel handy too.
For all your part needs go to www.SearsPartsDirect.com
If you rather haveservice go to www.SearsHomeservices.com
If you have anymore questions reply to this post.
Thank you for choosing Manage My Life.
Bradley, January 09, 2016
My Kenmore HE2 Plus washer MODEL 11047512602 is throwing an SD and F-21 code. We are using the correct detergent. Sears service guy is scheduled to come, but in 4 weeks. Have cleaned the filter and discharge hose is clear. Is there any other part I can clean or check just to try and get by. Pump is making a vibrating sound.
k, February 01, 2016
My front load washer model# 110.47532601 contantly throws an F21 and F33 codes. The drain pump was replaced three years ago. I always clean the pump filter every week, so I leave the front metal cover off for easy access. When I do clean the pump filter , I always check upstream of the pump for socks, etc. The wife knows not to over fill the soap as well.